Image

TalkPerfect TP-DX-N Duplex Intercom

  • Home
  • TalkPerfect TP-DX-N Duplex Intercom

TalkPerfect TP-DX-N Duplex Intercom

Candle image #1

TalkPerfect TP-DX-N Duplex Intercom

Product Code: TP-DX-N
Product DataSheet


The Ampetronic TalkPerfect TP-DX-N duplex intercom system is the control unit for a two-way voice enhancement system, with an integral Hearing Loop driver. Based on proven, reliable and patented technology, the full duplex system amplifies speech for both customer and staff whist minimising background noise and actively reducing acoustic feedback.

 
 
 
 

 

 

TalkPerfect TP-DX-N Duplex Intercom
 
The TalkPerfect TP-DX-N system not only comprises a full duplex intercom system, reinforcing communications from staff to customer and customer to staff with high quality amplified sound, but is also simple to install, does not require an external computer of software to set up, and once installed it is designed to function without further intervention.

The TalkPerfect TP-DX-N contains signal processing for system stability and clarity of speech and is shipped pre-set, directly for use with minimum set up adjustment.

The Hearing Loop (or Audio Induction Loop System [AFILS]) driver will allow hearing assistance to be provided to customers as part of the installation when connected to suitable installed loop wiring.

TalkPerfect TP-DX-N duplex intercom system -  KIT 1 (Standard) Diagram

Client Side:
1 x POD Speaker
1 x Glass Mount Microphone

Staff Side:
1x Combi Microphone/Speaker Unit

TalkPerfect applications include

  • Security reception desks
  • Customer returns points
  • Banks & Post Offices
  • High cash counters
  • Prison visitor desks
  • Benefits agencies
  • Police stations
  • Petrol forecourts

TalkPerfect TP-DX-N duplex intercom system

For the installer:

  • Modular and compact – flexible to install and unobtrusive
  • All connections are made on the rear panel of the control unit – simplifies and speeds installation
  • Stainless Steel or RAL colour finish speaker PODs – complimentary to any decor or required aesthetic

For the user:

  • Full duplex communication – allows natural conversation
  • Patented technology – minimises acoustic feedback
  • Proven reliability – low maintenance costs
  • Noise cancelling microphones – high rejection to background noise
  • Integrated hearing loop system – enabling connection with T-coil enabled devices e.g. hearing aids, cochlear implants and hand held receivers
  • Independent volume controls for both channels – comfortable listening for staff and client
  • Combined speaker, microphone & control model – easy to position and saves counter space *when installed with Combi Unit
  • Red LED ring signal – attractive indication of system operation *when installed with Combi Unit
Mic inputs Unbalanced electret microphone:
Source impedance <1kΩ
Gain: >60dB (control at max)
  Sensitivity: -50dBu (2.4mVRMS) @ 1kHz with gain control at max level
  Input noise level: -124dBu
  Input impedance: 1.1kΩ
  DC bias voltage: 12V though 11kΩ

 

Speaker O/Ps 4W per channel, <0.5% THD @ 1kHz with +9dBu (1.2W into 4Ω), 20Hz – 10kHz
  Minimum load: 4Ω, Frequency response: 100Hz – 6KHz +/-3dB

 

Loop O/P Current: 2.4A RMS, Max Voltage: +14dBu (3.9VRMS) THD <0.5% @ 1kHz with 2.2ARMS into 0.3Ω, 70uH
  Loop resistance: Min 0.3Ω
  Frequency response: 80Hz – 5.0kHz +/-1.5dB re: 1kHz
  AGC: 40dB dynamic range, high ratio limiting type
   MLC: Flat to >3dB per octave boost (fully anti-clockwise – flat response)

 

Control Status Mute turns all outputs off
  LED output indicates if the system is active – connect to ground

Physical

Dimensions & Weight width 220mm, depth 116mm, height 40mm, 630g
Temperature Range -30 to +75ºC, 20 to 95% relative humidity
Environmental IP30

 

DC Power 12VDC, Range: 9VDC to 16VDC
  Power Quiescent: 3.0W (250mA)
  Power Maximum: 24W (2.0A)
  Protection: 2.0A resettable device

Accessories

Microphones POD Microphone, Combi Unit, Glass Mount Microphone
Speakers POD Speaker, Combi Unit
 


File Name Download
Ürün Broşürü Download